0800 316 1217


under tile/slate eaves protector 1.5m long

£3.10 Incl. VAT

Product Information

Roofing felt perishes over a period of time, and is at its most vulnerable at the lower end, the eaves. This is where the felt can sag and water can collect, this is called ‘ponding’. After some-time the ponding effect causes the felt to rot and rupture, allowing the water to access the roofing system.
The Eaves Guard/Felt Support Tray, which is plastic, prevents this as it is rigid enough to prevent the overlapping felt to sag or pond, and so avoids the natural breakdown process.
An Eaves Tray is the most cost effectiveway of providing a complete and robust felt support system that will not deteriorate, giving additional protection to the fascia detail, and suitable for use with all slates and tiles.


They measure 1.5m in length and 290mm tall. These will reach up the rafters 190mm


These will need to be overlapped by a minimum of 100mm, meaning that each tray covers a maximum of 1.4m


For eaves tray fitting instructions click here.