0800 316 1217

info@kentsdirect.com

270mm Chamber Base Adjustable

£54.49 Incl. VAT

Product Information

This Large Inspection Chamber (LIC) has a cross section of 450mm and has a height of 270mm. This can be extended up to 1200mm with the use of a chamber riser, available in 235mm height.

When used with a Restricted access cover and frame, for safety, many risers can be used on top of each other down to a depth of 3000mm.


This LIC has 5 inlets exiting at 45° and 90° to the main flow. The outlets on this Large Inspection Chamber are adjustable by 10° in any direction aimed to simplify installation.

We can also supply fixed outlet chambers which can reduce the cost in straight forward installations.

Use this chart to determine which risers you need to finish at the correct height you require.

For depths up to 1200mm

Height (mm)2705057409751210
Number of Risers RequiredBase Only1234
Cover Required(D930) 450mm Opening(D930) 450mm Opening(D930) 450mm Opening(D930) 450mm Opening(D930) 450mm Opening

For depths 1200mm to 3000mm

Height (mm)14451680191521502385262028553090
Number of Risers Required56789101112
Cover Required(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening(D931) 350mm Opening

On top of this chamber you will need to pick a suitable frame and cover. These can be round or square and we have a cover frame suitable for block paving to be installed onto.

Any changes in direction of the main flow should be achieved outside of the chamber with the use of pipe bends. The self cleansing of the chamber cannot be guaranteed if you try to change the direction of main flow inside the chamber, due to the design.

 

After the pipe work and chamber have been fitted in place, the trench should be filled up to the crown of the pipework with pea shingle or similar, and the rest can be back filled with the dug out earth up to ground level.

 

SKU: D900 Category:

You may also like…

£16.63 Incl. VAT
This 235mm extension riser is to be installed directly on top of the any of Large Access Chambers. To finish at the correct ground height, the riser can be cut at any heigh...
This 450mm Round plastic screw down cover and frame will sit on top of either a Large Inspection Chamber (LIC) or onto risers that are attached to a LIC. The cover is to be...
£4.12 Incl. VAT
A chamber sealing ring should be used between each chamber extension riser to ensure a sound, tight connection. These are designed to be used on the Large Inspection Chambe...
This 450mm Round plastic screw down cover and frame will sit on top of either a Large Inspection Chamber (LIC) or onto risers that are attached to a LIC. The cover is to be...
This 450mm square/round block paving cover is a two part product. The bottom piece is suitable to connect directly to chamber riser. The block paving or other driveway finish ...