0800 316 email@example.com
£32.36 Incl. VAT
This MAC has 3 inlets exiting at 90° to the main flow. The outlets have a 10° range of motion in all directions to allow to ease of fitting and to reduce the amount of extra bends that may be required to make pipework fit correctly.
We can also supply fixed outlet chambers also, which will save money on straight forward installs.
Use this chart to determine which risers you need to finish at the correct height you require.
|MAC Height||Including Lid|
|Base and 1 Riser (100m)||370||400|
|Base and 1 Riser (200mm)||470||500|
|Base and 1no 100mm, and 1no 200mm riser||570||600|
On top of this chamber you will need to pick a suitable frame and cover. These can be round or square and we have a cover frame suitable for block paving to be installed onto.
Any changes in direction of the main flow should be achieved outside of the chamber with the use of pipe bends. The self cleansing of the chamber cannot be guaranteed if you try to change the direction of main flow inside the chamber, due to the design.
After the pipe work and chamber have been fitted in place, the trench should be filled up to the crown of the pipework with pea shingle or similar, and the rest can be back filled with the dug out earth up to ground level.