0800 316 1217

info@kentsdirect.com

4m Ogee Gutter White

£17.10 Incl. VAT

Product Information

The Ogee gutter is now a symmetrical profile and comes in a four metre length.

The fact it is a symmetrical profile negates the need for the handed, external or internal fittings.

The gutter is co-extruded using a white core with an extruded colour over the top. This technology gives the manufacturer the ability to guarantee all the colours for upto 20 years.

The dimensions are as follows – 135mm across the top – 77mm deep

You may also like…

The amazing Hedgehog Brush gutter guard keeps your gutter and down pipes clear all year round. This simple UK made product just sits in most domestic gutters, round, squar...
£4.76 Incl. VAT
The 90 degree gutter angle is universal therefore you don't need an external or internal version.
£1.36 Incl. VAT
The Ogee gutter bracket is the support bracket to hold the lengths of gutter. As a general rule in a standard installation the brackets should be no greater than a metre apart...
£4.71 Incl. VAT
The running outlet is a standard pipe outlet where the length of gutter will join the downpipe, the pipe will connect straight onto the outlet or indeed the offset bends will....
The Internal stopend is universal, meaning its not handed. Its designed to fit inside the running outlet to blank the end and finish the run.  
£3.14 Incl. VAT
The Ogee gutter union is the standard joint to joint two lengths of the gutter together. The union is also fixed to the fascia so acts as a support as well.
£2.26 Incl. VAT
The external stop end is universal, meaning its not handed and is used to finish off the length off gutter when it comes to a blank end.  
£5.19 Incl. VAT
The 135 degree gutter angle is universal therefore you don't need an external or internal version. The 135 is normally used for any "bay window" angles.